���� ������ ����� BEHRINGER EP4000 4000W

���� ��� ��� - �� 4000 ���� �����'

Professional 4000 W Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology
2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
ATR (Accelerated Transient Response) technology for ultimate punch and clarity
Switchable limiters offer maximum output level with reliable overload protection
Detented gain controls for precise setting and matching of sensitivity
Precise Power, Signal and Clip LEDs to monitor performance

XLR and 1/4" TRS input connectors for compatibility with any source
Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
Selectable low-frequency filters remove damaging infra-sound frequencies
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
High-current toroidal transformer for ultra-high transient response and absolute reliability
"Back-to-front" ventilation system including air filter for reliable operation
"Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis
Feature EP4000 EP4000/EP2000
Output Power (20 Hz - 20 kHz @ 0.1% THD, both channels driven)
8 Ω per channel 550 W �
4 Ω per channel 950 W �
2 Ω per channel 1250 W �
Output Power (RMS @ 1% THD, sine wave, bridged mode)
8 Ω 1750 W �
4 Ω 2400 W �
Peak Power (both channels driven)
8 Ω per channel 750 W �
4 Ω per channel 1400 W �
2 Ω per channel 2000 W �
Peak Power (bridged mode)
8 Ω 2800 W �
4 Ω 4000 W �
Distortion <0.02% �
Frequency Response 20 Hz � 20 kHz, �0.5 dB At 10 dB below rated output power
At -3 dB points: 5 Hz � 50 kHz
Damping Factor >300 @ 8 Ω �
Voltage Gain 40x (32 dB) �
Input Sensitivity 1.15 V (+3.4 dBu) �
Input Impedance 10 kΩ unbalanced, 20 kΩ balanced �
Cooling � Continuously variable speed fan, back-to-front air flow
Amplifier Protection � Full short circuit, open circuit, thermal and HF protection; Stable into reactive or mismatched loads
Load Protection � Turn-on/off muting, AC coupling
Output Circuit Type Class H complementary linear output �
Power Supply � 100-120 V~, 50/60 Hz 15A, 220-230 V~, 50/60 Hz 8A
Power Consumption 2600 W �
Mains Connector � Standard IEC receptacle
Dimensions (HxWxD) approx. 3.5 x 19 x 15.8" �
Weight approx. 36.6 lbs / 16.6 kg �
Controls Power switch, gain control (channels 1 and 2) �
Indicators green LED (POWER), red LED (CLIP), yellow LED (SIGNAL) �
Inputs Balanced XLR and �" TRS connectors �
Outputs Touch-proof binding posts and professional speaker connectors �